References

Publications consulted to compile Construction timbers in Queensland.

Australian Building Codes Board. 2002, Guideline on durability in buildings, Australian Building Codes Board, Canberra, Australian Capital Territory, www.abcb.gov.au .

Australian Building Codes Board. 2006, Building code of Australia, Volume 1 (Class 2 to Class 9 buildings) and Volume 2 (Class 1 and Class 10 buildings), Australian Building Codes Board, Canberra, Australian Capital Territory, www.abcb.gov.au

Australian National Botanic Gardens. 2016, Australian Plant names Index. Australian Government, Canberra, viewed May 2016. https://www.anbg.gov.au/apni/

Australian Pesticides and Veterinary Medicines Authority. 2005, The reconsideration of registrations for arsenic timber treatment products (CCA and arsenic trioxide) and their associated labels: report of review findings and regulatory outcomes, Summary report. Review Series 3, March 2005, Australian Pesticides and Veterinary Medicines Authority, Canberra, Australian Capital Territory.

Building Codes Queensland. 2000, Proposed amendments to the BCA housing provisions: termite risk management, Building Newsflash, Building Codes Queensland, Department of Communication and Information, Local Government, Planning and Sport, Queensland.

Cause, ML, Rudder, EJ & Kynaston, WT. 1989, Technical pamphlet no. 2: Queensland timbers—their nomenclature, density and lyctid susceptibility, Queensland Forest Service, Brisbane.

Hayward, D. 2005, Timber flooring—version 1, Forest and Wood Products Research and Development Corporation, Victoria.

Hopewell, G (ed.). 2006, Construction timbers in Queensland: properties and specifications for satisfactory performance of construction timbers in Queensland, Class 1 and Class 10 buildings, books 1 and 2, Department of Primary Industries and Fisheries, Queensland.

International Plant Names Index. 2016, Collaborative project between the Royal Botanic Gardens, Kew, the Harvard University Herbaria and the Australian National Herbarium, viewed 23 May 2016, http://www.ipni.org

MacKenzie, C, Wang, C-H, Leicester, RH, Foliente, GC & Nguyen, MN. 2005, Timber service life design guide, draft October 2005, Forest and Wood Products Research and Development Corporation, Melbourne.

Queensland Forest Service. 1939, Pamphlet no. 1: North Queensland building timbers and specifications for their use, Sub-Department of Forestry, Department of Public Lands, Brisbane.

Queensland Forest Service. 1947, Pamphlet no. 2: South Queensland building timbers and specifications for their use, Sub-Department of Forestry, Department of Public Lands, Brisbane.

Queensland Forest Service 1951, Pamphlet no. 1: North Queensland building timbers and specifications for their use, revised edition, Sub-Department of Forestry, Department of Public Lands, Brisbane.

Queensland Forest Service. 1964, Pamphlet no. 5: North Queensland building timbers and specifications for their use, Department of Forestry, Brisbane.

Smith, WJ, Kynaston, WT, Cause, ML & Grimmet, JG. 1991, Technical pamphlet no. 1: Building timbers—properties and recommendations for their use in Queensland, Queensland Forest Service, Department of Primary Industries, Brisbane.

AS/NZS 1080.1-1997 Timber—methods of test—moisture content, Australian Standard/New Zealand Standard.

AS/NZS 1148-2001 Timber—nomenclature—Australian, New Zealand and imported species, Australian Standard/New Zealand Standard.

AS 1604.1-2005 Specification for preservative treatment—sawn and round timber, Australian Standard.

AS 1604.2-2004 Specification for preservative treatment—reconstituted wood-based products, Australian Standard.

AS 1604.3-2004 Specification for preservative treatment—plywood, Australian Standard.

AS 1604.4-2004 Specification for preservative treatment—laminated veneer timber products, Australian Standard.

AS 1604.5-2005 Specification for preservative treatment—glued laminated timber products, Australian Standard.

AS 1684.2-2010 Residential timber—framed construction—non-cyclonic areas, Australian Standard.

AS 1684.3-2010 Residential timber—framed construction—cyclonic areas, Australian Standard.

AS 1720.1-2010 Timber structures—design methods, Australian Standard.

AS 1720.2-2006 Timber structures—timber properties, Australian Standard.

AS 1810-1995 Timber—seasoned cypress pine—milled products, Australian Standard.

AS/NZS 2878-2000 Timber—classification into strength groups, Australian Standard/New Zealand Standard.

AS 2796.1-1999 Timber—hardwood—sawn and milled products—part 1: product specification, Australian Standard.

AS 3660.1-2000 Termite management—part 1: new building work, Australian Standard.

AS 3959-2009 Construction of buildings in bushfire-prone regions.

AS/NZS 4063-2010 Timber—stress graded—in-grade strength and stiffness evaluation, Australian Standard/New Zealand Standard.

AS/NZ 4063.1-2010. Timber—stress graded—in-grade strength and stiffness evaluation. Characterisation of structural timber. Part 1: Test methods. Australian Standard/New Zealand Standard.

AS/NZ 4063.2-2010. Timber—stress graded—in-grade strength and stiffness evaluation. Characterisation of structural timber. Part 2: Determination of characteristic values. Australian Standard/New Zealand Standard.

AS 4785.1-2002 Timber—softwood—sawn and milled products, Australian Standard.

AS 5604-2005 Timber—natural durability ratings, Australian Standard.

Australian Standards are distributed online at Sai Global